0,00 
0
0
Subtotal: 0,00 
No products in the basket.
Ruckus Commscope logo with dog symbol.
Peplink Certified Gold Partner Logo

Poynting Antenna Accessories A-SPLT-0016-V1-01 Ultra Wideband 2-Way Splitter 2 x N-Type(F) & 1 x N-Typr(M)

Customized support
+ Installation service
+ Managed Services

Poynting Antenna Accessories A-SPLT-0016-V1-01 Ultra Wideband 2-Way Splitter 2 x N-Type(F) & 1 x N-Typr(M)

99,87  plus. VAT

The SPLT-16 is a 2-way splitter that has ultra-wideband operation and works from 410 to 7200 MHz. Ultra-wideband operation Ultra-wideband operation enables multiple implementations and can be used for all common 4G/LTE and 5G applications as well as for dual-band Wi-Fi implementation. The product implements the design of a Wilkinson power divider, as this ensures low loss and at the same time a good phase and amplitude balance. The SPLT-16 can be used as a splitter to split the power from a single antenna to two independent devices. The SPLT-16 can also be used as a combiner to combine two separate antennas into a single device, providing antenna diversity and improved performance. The SPLT housing is made of ABS with UV stabilizer, a highly impact-resistant plastic that is also resistant to acids and other chemicals. other chemicals. Poynting – Antenna accessories – A-SPLT-016-V1-01 – Ultra-wideband two-way splitter (410 – 700 MHz) with 2 x N-type (F) & 1x

Availability: 2 in stock

The Poynting ULTRA-WIDEBAND TWO-WAY SPLITTER

Available from September 2021

Overview

The SPLT-16 is a 2-way splitter that has ultra-wideband operation and works from 410 to 7200 MHz. Ultra-wideband operation
Ultra-wideband operation enables a variety of implementations and can be used for all common 4G/LTE and 5G applications as well as dual-band Wi-Fi.
Implementation. The product implements the design of a Wilkinson power divider, as this ensures low loss and at the same time good phase and voltage stability.
Amplitude balance. The SPLT-16 can be used as a splitter to split the power from a single antenna to two independent devices. The SPLT-16
can also be used as a combiner to combine two separate antennas into a single device, providing antenna diversity and improved
performance. The SPLT housing is made of ABS with UV stabilizer, a highly impact-resistant plastic that is also resistant to acids and
other chemicals


Properties

  • Ultra-wideband operation from 400 to 7200 MHz
  • Low-loss Wilkinson splitter design
  • Constant phase and amplitude balance
  • Good isolation between the ports

Area of application

  • Least cost routers (LCRs)
  • Combining the coverage of two antennas into a single device
  • Splitting the power from a single antenna to two independent devices


Technical data

  • Frequency bands: 410 – 7200 MHz
  • VSWR: <1.5:1
  • Over 95% of the belts
  • Load capacity of the power supply: 10 W
  • Input impedance: 50 Ohm (nominal)
  • Coaxial cable loss:
  1. 0.232 dB/m @ 400 MHz
  2. 0.362 dB/m at 900 MHz
  3. 0.514 dB/m at 1800 MHz
  4. 0.533 dB/m at 2400 MHz
  5. 1.07 dB/m @ 5800 MHz
  • Wind survival rate: <160 km/h
  • Temperature range (operation): -40°C to +70°C
  • Ambient conditions: Outdoor/indoor
  • Type of protection/standard against water ingress: IP 68 (NEMA 4X)
  • Salt spray: MIL-STD 810G/ASTM B117
  • Relative humidity during operation: Up to 98%
  • Humidity during storage: 5% to 95% – non-condensing
  • Storage temperature: -40°C to +70°C
  • Flammability class of the housing: UL 94-HB
  • Impact resistance: IK 10
  • Product dimensions 158 mm x 96 mm x 40 mm (without cable, plug)
  • Packaging dimensions: 205 mm x 192 mm x 54 mm
  • Radome material: PC-ABS with UV stabilizer
  • Color of the radome: Pantone – Cool grey (11C)
  • Mounting type: Surface mounting


0/5 (0 Reviews)
Weight 0,340 kg
Dimensions 158,000 × 96,000 × 40,000 cm