Skip to main content
Branch Networking with SD-WAN: Krämer Pferdesport Case Study (AI-generated image)
More about our AI labelling

Retail case study

Branch Networking with SD-WAN: Krämer Pferdesport Case Study

Point of sale, merchandise management and the online shop at Krämer Pferdesport run on a network that never leaves a store on its own: Peplink routers from the Balance series bundle the lines of each location into the Hockenheim headquarters via SpeedFusion. If a line fails, the session keeps running. Ascend selected the solution together with the customer, introduced it and supports the rollout to further sites.

The principle at a glance

Branch networking with SD-WAN at Krämer Pferdesport: Mega Store with a Balance router and two lines, encrypted SpeedFusion tunnel with Hot Failover, headquarters in Hockenheim with corporate network and merchandise management

Each Mega Store gets a Peplink router from the Balance series that bundles the location's existing connections, such as DSL, fiber, MPLS or LTE, into an encrypted SpeedFusion tunnel to the headquarters in Hockenheim. If a line drops, the tunnel switches over at packet level without the session to the merchandise management system breaking off. The InControl Virtual Appliance at headquarters manages all routers in one place.

What the branch network had to solve

A specialist retailer with Mega Stores in several countries and a large online shop needs more than one internet line per store. The requirements of Krämer Pferdesport and the answers of the Peplink solution:

Bandwidth bonding

SpeedFusion combines the DSL, fiber, MPLS and LTE connections of a location into a single WAN connection. The bandwidth of the lines adds up.

Hot Failover without interruption

If a line fails, the router redirects traffic at packet level to the remaining lines. The switchover time is short and transparent.

Sessions stay alive

Point of sale, merchandise management and payment processing keep running because the connection to headquarters does not have to be rebuilt when a line changes.

Central management

The InControl Virtual Appliance at headquarters handles rollout, configuration and monitoring of all routers, regardless of place and time.

Per-packet encryption

Every data packet in the SpeedFusion tunnel is encrypted individually. Eavesdropping on the path between store and headquarters is therefore not possible.

Round-the-clock support for existing customers

Ascend advises independently of vendors, introduces the solution and stands ready in operation with 24×7 support for existing customers, including during expansion to further locations.

From requirements catalog to live operation

  1. 1
    RequirementsKrämer Pferdesport defines the goals: uninterrupted communication between all locations and headquarters, short and transparent failover times, and one solution for a heterogeneous IT infrastructure spread across several countries.
  2. 2
    SelectionSeveral vendors are evaluated. Peplink convinces with its integrated multi-WAN functions. Ascend and the distributor Vitel advise on product selection; the decision falls on the Balance series.
  3. 3
    RolloutThe setup is designed for 100 locations from the start. In the first six months, four existing locations are connected to the headquarters in Hockenheim via SpeedFusion, and initial errors in the OSPF routing protocol are fixed at short notice.
  4. 4
    OperationThe InControl Virtual Appliance manages and monitors the entire site network. Further locations are equipped step by step, and Ascend support is available to existing customers around the clock for any questions.

Starting point: specialist retail with a branch network and an online shop

Brick-and-mortar and online retail are growing together. Specialist retailers run a branch network with many outlets and, at the same time, an online shop that uses the same stock levels, prices and customer data. This only works if the local networks of all locations are reliably connected to headquarters.

Krämer Pferdesport is exactly such a specialist retailer. The company, headquartered in Hockenheim, develops, distributes and sells more than 25,000 items for equestrian sport. At the time of the project, more than 900 employees served over 800,000 customers in Germany, Austria, Luxembourg, France, the Netherlands and Belgium, as well as in Switzerland through the subsidiary Felix Bühler. Around one million orders a year were processed through the online shop kraemer.de. Besides mail order, Krämer operated so-called Mega Stores at many locations in the DACH region and in France, each with around 1,300 square meters of sales floor. As of November 2026, the store overview on kraemer.de lists 56 Mega Stores in Germany, Austria and Belgium.

For staff in the stores to handle inquiries and orders promptly, complete payments and work with the merchandise management system, they must be able to communicate without interruption over the company network. Even short outages in the IT landscape significantly disrupt work processes: a till without a connection to headquarters does not sell, and a warehouse without stock reconciliation ships the wrong goods. Krämer Pferdesport therefore looked for a router solution for site networking that ensures a stable connection for all distributed locations.

High requirements for the router solution

During its research, Krämer Pferdesport evaluated several providers of router solutions. “The requirements for site networking were very high, so many products from these vendors did not even come into question,” says Phil Stricker, Managing Director of Krämer Pferdesport. “The heterogeneous IT infrastructure, deployed across several countries, calls for a highly flexible solution that guarantees resilience at all times through shorter and transparent failover times.”

Eventually the company became aware of Peplink and its partners in the DACH region, the distributor Vitel and the IT systems house Ascend. The team around Mr. Stricker got in touch to learn about the router solutions. Ascend and Vitel provided advice and helped select the products that fit the individual requirements of Krämer Pferdesport.

The deciding factor was the integrated multi-WAN functionality of the Peplink routers: several connections per location are not just held in reserve as a backup, but used and monitored at the same time. The choice fell on the Balance series, which offers the same SpeedFusion technology and the same management via InControl from the compact branch router to the rack device for headquarters. Which Balance models fit which location size today is shown further down in the section Matching hardware in the Ascend Shop.

Single line or SD-WAN with SpeedFusion: the difference in everyday branch operations

One line per branchSD-WAN with SpeedFusion (Peplink Balance)
Line failsThe branch is offline until the provider fixes the fault.Traffic continues over the remaining lines at packet level (Hot Failover).
BandwidthLimited to the one connection; the backup line sits idle.The bandwidth of the bonded lines adds up to a single WAN connection.
Session to merchandise managementBreaks off when the line changes; login and transaction start over.Stays alive; the switchover is transparent for the till and the application.
EncryptionDepends on the individual application or a separate VPN.Every packet in the SpeedFusion tunnel is individually encrypted with 256-bit AES.
ManagementEach location is configured and monitored individually.InControl manages all routers centrally, also as a virtual appliance in your own headquarters.
Adding locationsEvery new branch is a project of its own.New routers are rolled out with a prepared configuration; setup planned for 100 locations.

Bandwidth bonding and Hot Failover in operation

Based on the patented SpeedFusion technology, the remote locations were connected to the central corporate network of Krämer Pferdesport. During implementation, errors with the OSPF routing protocol (Open Shortest Path First) occurred at first. The engineers resolved the initial problems at short notice, so that data packets have been transported efficiently through the connected networks ever since.

Via SD-WAN, the Peplink routers support different connection types such as MPLS, LTE, DSL and fiber. The speed and bandwidth of these connections are bundled into a single WAN connection; the result is a stable VPN network with the maximum available bandwidth. Once the SpeedFusion tunnel is established, the data packets are sent individually over the available WAN connections. Each packet is encrypted on its own and is therefore inaccessible to a man-in-the-middle attack.

If a fault occurs, the system detects it immediately and redirects traffic at packet level to an alternative connection prioritized in advance. The core function is Hot Failover: the switch from one WAN connection to another without any risk of the session dropping. This keeps communication with the merchandise management system reliable even during a switchover, and at the till nobody notices that a line has just changed.

The central management platform InControl, run as a Virtual Appliance (ICVA) in Krämer Pferdesport's own data center, supports those responsible during rollout and in the daily administration and monitoring of the entire site network. Future requirements were also taken into account in selection and implementation: the setup provided for 100 locations as a basis from the start. In the first six months, four existing locations were networked with each other; in the long term, the company planned to equip all 52 locations at the time with Peplink devices step by step.

What Ascend takes on for branch networks

Ascend has been based in Nuremberg since 2010 and has been networking locations for companies of every size for more than 15 years, from a craft business with two branches to a branch network with several dozen Mega Stores in several countries. In consulting we are vendor-independent; in implementation we are a certified Peplink partner.

For a project like the one at Krämer Pferdesport, we take on the analysis of the locations and their existing connections, the selection of suitable Balance models for branch and headquarters, the preconfiguration of the SpeedFusion profiles and the staged rollout. On request, we operate the SpeedFusion hub not in your headquarters but redundantly in our data center, as described on the page Site networking. In operation we stand ready with round-the-clock support, maintain firmware and configuration and support the expansion to further locations.

For all employees to do their work as well as possible, whether on the road, at headquarters in Hockenheim or in the outlying branches, a stable connection to the company network is needed. With the Peplink routers and SpeedFusion technology, Krämer Pferdesport has a powerful basis for this: SD-WAN technology bundles different connection types, detects connection faults and redirects traffic seamlessly over the remaining lines. Hot Failover ensures that sessions continue when connections change.

This case study is based on a case report written by Lena Schneider, freelance journalist. A second Peplink reference from a completely different environment, the outside broadcasting of MDR, can be found under Further links.

An SD-WAN router does not replace a firewall

A Peplink Balance bundles lines, builds the encrypted tunnels and handles failover and central management. It does not replace a next-generation firewall with content inspection, as Krämer Pferdesport also stresses. Plan the firewall and the SD-WAN router as two roles that work together: the Balance secures the connection, the firewall filters the traffic. We take both into account in the analysis so that neither role is overlooked.

Matching hardware in the Ascend Shop

The Balance series covers every location size from the small store to headquarters, all with SpeedFusion and InControl. You will find prices and delivery times directly in the shop.

What Krämer Pferdesport says

The solution is exceptionally reliable in a multi-WAN environment. It does not replace firewalls, but implements the core functions cleanly. With technical problems, support helped us at any time and responded quickly. In the future, too, we will turn to the experts with questions and, together with Ascend GmbH, push the further expansion forward.
Phil StrickerManaging Director, Krämer Pferdesport

Frequently asked questions about branch networking with SD-WAN

Connect your branches with failover protection now

Tell us how many locations you have and which connections are in place there. We plan branch networking with SD-WAN together with you, from the selection of Balance models to the rollout.

We look forward to hearing from you!

Tell us the number and countries of your locations, the existing connections and the applications that must keep running. We will get back to you shortly with a personal consultation.

We usually reply within one business day · we never share your data